Mostly smooth and free of pesky pedestrians.

Asphalt is mostly smooth. The trail is also refreshingly free of pesky pedestrians.

The walking trail is very beautiful. I would like to go more times to this park.

Today I rode from the Hawkins Rd parking lot (put 5998 Hawkins Rd, Jackson into your GPS to find it) to Stockbridge and back. What a great ride! About 24 miles round trip. There is a vault toilet (clean) in Stockbridge and a porta-potty at Hawkins Rd. Just picnic tables in Munith. This portion of the trail is crushed limestone, but it is well-packed for easy pedaling.

This is a nice, short connector trail between the Village of Milford and Kensington Metropark. Paved and smooth the entire way. The construction from last summer is long finished now and the trail has been restored. This trail is fairly hilly along its entire route. It will give you a pretty good workout, but at the Kensington end, you can reward yourself with a stop at the Dairy Queen! The entire route is very scenic with markers every half mile. It is mostly wooded, and passes over a dam, near a fenced dog park, and through the equestrian staging area at Kensington. Only one major road crossing. Wildlife spotting is common (deer, turkeys, hawks), especially through the Kensington portion.

The north part of this trail is quite nice, but the south half is very rough. The south end has many driveways cut through the older trail surface which makes for a rough ride. I rode this trail with my recumbent trike and will not do it again.

Very nice ride with some natural areas. Subdivision contractor should be fined for disrupting the trail for so long. Apparently, it’s been going on for over a year. The biggest issue is the contractor has cut off the asphalt where they are working and there’s a drop off of nearly a foot that you don’t notice when going south until you’re right at the end of end. You have to go around on mud/grass (if you see it in time)!

The trail is nice, clean and beautiful. Further, it is not too crowded. We really enjoyed the hiking .

As a disclaimer, the Border-to-Border Trail isn't technically complete yet. There are still connecting pieces of it being worked on and created, but once this trail is complete you will be able to ride from Ypsilanti all the way to Chelsea without once having to turn onto any roads.

I rode this trail a lot in summer 2020, starting in Ypsi and making my way to either Ann Arbor or Dexter. It is a shared trail and goes through some very popular parks, so expect to see more leisurely bikers, runners/walkers and families on parts of this trail. Unless you're heading out very early or very late, this is not the trail to smash PRs or sprint on. It is a wonderful trail for scenic routes, has plenty of places to stop for a snack break (tables available in parks) and has access to restrooms (also available in the parks). There are a couple water fountains in certain sections on the trail for refilling any water bottles and there are also bike stations with air pumps for any needed bike repairs while on the trail.

There are sections that definitely need some TLC - hence the 4 star rating - mainly the section right after the Gallup Park wooden bridge (when heading west). The path here is rough - the pavement is rutted, not smooth and often I have to ride in the middle of the path since the edges are worn and broken. The going is very slow here -- but hopefully that will be repaired sometime in the future.

The Ann Arbor "terminus" is at Bandemeer Park. There currently isn't a connection to the Dexter portion of the B2B trail (currently being worked on and not slated for completion until 2022, I believe), so if you wish to continue your journey to Dexter some road riding is needed. You can either ride through the Barton Hills neighborhood (the first left outside of Bandemeer Park) to Huron River Drive, or take a shorter route through the Barton Nature Area to connect to Huron River Drive. The route through Barton Nature Area is short while the ride through Barton Hills is longer and has some steep hills (especially near the Barton Hills Golf Course). Still a pretty ride, though. Once you get to Huron River Drive -- there's no bike lanes but it's a popular road cycling route so drivers are usually familiar with seeing cyclists there. It's about 6 miles of curvy road riding on Huron River Drive before you can connect to the Dexter portion of the B2B trail. Ypsilanti to downtown Dexter is the longest section of the trail I've ridden so far, so I can't comment on the Dexter to Chelsea route.

Overall I highly recommend this trail, and I really commend the cities of Ypsilanti, Ann Arbor, Dexter and Chelsea for creating and managing it. You can ride select parts of the trail or all of the trail -- since the B2B goes through main parks it's easy to drive and park at different spots to start. And since the trails also pass through or near each of the cities' downtown areas, you can also easily hop off to check out any restaurants, events or sites in town. My favorite stops are the Argo Cascades in Ann Arbor (you can pull to the side of the trail and watch the kayakers and tubers go down the river -- and even take a dip in the river if it's a particularly hot day), the local Dairy Queen in Dexter during the summer, the Dexter Cider Mill in the fall, and Go! Ice Cream in Ypsilanti any time of the year. When I'm doing shorter, leisurely rides with others I like to pack a lunch and bike from the east end of Gallup Park (off N Dixboro Road) to the Argo Cascades and stop to have lunch on the river bank and bike back, or bike from Ypsilanti to Gallup Park, have a picnic at Gallup Park and then bike back to Ypsilanti.

As one last head's up there is a local bike shop near the Ann Arbor B2B trail if you have any major bike issues during your trip - Sic Transit Cycles - only about 200 feet from the trail, right by the Argo Cascades.